filafarm

Filafarm ABS (Acrylnitril-Butadien-Styrol) is a commonly used plastic that is used to produce products like "Lego" for example. This material is s...

Filafarm ABSgen (Acrylnitril-Butadien-Styrol) is 100% pure ABS filament with no additive and unique technical properties. AntiW...

BoroBase is a complete Printbed Kit and offers the best performance, precision and rigidity for all FFF/ FDM 3D printers and is made in G...

Borosilicate Glass is very flat and has good adhesive features compared to normal or mirror glass. It is even possible to print small&nbs...

CarboBase is a complete Printbed Kit and offers the best performance, precision and rigidity for all FFF/ FDM 3D printers   and is made i...

The  sheet is ideal for the printing of  ABS, PLA, and many other Filaments. When heated the first layer adhes...

Filafarm CarboTec+ is a nylon co-polymer industrial grade filament made with carbon fibre. This filament is based on PA6 and offers stro...

NONPROFIT (Material-, Bearbeitung- und Handlingkosten) Gelasertes PETG Visier* 0,75mm, passend für das original Prusa Protective Face Shield RC3 -...

Der Düsendrehmomentschlüssel erleichtert den Austausch von Düsen. Die 1,5 Nm Einstellung des Schlüssels verhindert das Überdrehen und auch undichte...

EpoBase is a complete Printbed Kit and offers the best performance, precision and rigidity for all FFF/ FDM 3D printers and is made in Germa...

The   sheet is ideal for the printing of ABS, PLA, and many other Filaments. When heated the first layer adhesio...

Filafarm FibreTec+ is a nylon co-polymer industrial grade filament strengthened with fibreglass. This filament is based on PA6 and is our...

FilaBase is a complete Printbed Kit and offers the best performance, precision and rigidity for all FFF/ FDM 3D printers and is made in Germany. ...

FilaBase RS is a complete Printbed Kit and offers the best performance, precision and rigidity for all FFF/ FDM 3D printers and is made in Ge...

The Filafarm FilaPrint® Black Edition permanent printing plate, is ideal for den 3D printing of: ABS, PLA, PET, PETG, PETG/Carb...

Our bestseller, the Filafarm FilaPrint® permanent printing plate, is ideal for den 3D printing of: ABS, PLA, PET, PETG, PETG/Ca...

The Filafarm FilaPrint®RS permanent printing plate, is ideal for den 3D printing of: ABS, PLA, PET, PETG, PETG/Carbon, ASA...

This LCD-Controller & SD reader ist compatible with Smoothieboard and Ramps 1.4 and offers a enhanced graphic interface compraded t...

With Filafarm "Goldig" PLA (Polyactide) we put all our energy into creating a beautiful, realistic looking gold filament.The Filament offers a...

Duration: 4h / online or on site (excl. travel)If you have recently purchased a Prusa Research printer or already own one but would like to improve...

Duration: 4h / online or on site (excl. travel)If you have recently purchased a Raise3D printer or already own one but would like to improve your k...

Duration: 4h / online or on site (excl. travel)If you have recently purchased a UltiMaker printer or already own one but would like to improve your...

Its not just a Kapton. Its the best Kapton we could find. extreme adhession and durable. "Made in Germany" technical data - 33x10mm ...

Suitable heat sink for SSR semiconductor relay for switching load currents.

  Filafarm MAGbase is a temperature-resistant self-adhesive magnetic film for flexible print bed surface systems.  Detai...

The Filafarm Micro V6 Hotend stands for our revised version of the E3D V6. The heat sink and heating block are original E3D components. The design ...

Mini radial fans are suitable for cooling hotend and the print by itself. This small 12V fan has alot of power and builds up more pressure than ...

Extension cable for Molex connections (e.g. for thermistor), mechanically crimped on both sides. 

High value stabilised power supply for indoor and outdoor usage Variant: V-TAC Transformer in metal case, 12V or 24V options  ...

NoBase is a Printbed Kit and offers the best performance, precision and rigidity for all FFF/ FDM 3D printers and is made in Germany. It...

Filafarm NylonTec+ is a Nylon Co-polymer industrial grade filament. This filament prints very easily and offers diverse proper...

12V cartridge heater with 40W power. 24V operation is possible via PWM. Measurements Lenght: 16mm Diameter: 6mm Cable lenght: 1 meter ...

12V cartridge heater with 90° and 40W power.  24V operation is possible via PWM. MeasurementsLenght: 16mmDiameter: 6mmCable lenght: ...

PeiBase is a complete Printbed Kit and offers the best performance, precision and rigidity for all FFF/ FDM 3D printers and is made in...

The    is a thin print film and ideal for the 3d-printing of ABS, PLA, PETG, and many other Filament...